JUAL ALTERNATOR NIEHOFF
Posted by panenraya on Mar 2, 2017 in Electrical Parts | 0 comments
A unique, different design
CEN alternator designs are unique in the industry. Unlike the conventional Lundell/claw pole configuration employed by most alternator manufacturers, our alternators use a non-reversing magnetic field and laminated rotors. Both of these factors result in lower magnetic losses, higher efficiency, and less waste heat. The low number of stator poles inside the alternator allows for generous air flow through the machine. These factors combine to make our alternators extremely energy efficient and reliable.
Brushless is better
CEN alternator designs favor a stationary field coil which eliminates the need for brushes and slip rings, that wear and need periodic replacement, to convey power to a rotating field. In addition, the normal arcing associated with brush operation is eliminated; greatly reducing the amount of generated Electromagnetic Interference (EMI). As such, the bearings are the only components of our design to experience mechanical wear.
High efficiency is fuel saving
The reduced mechanical drive power used by our higher efficiency alternators yields engine fuel savings, less stress on alternator drive components, and more engine power available for other purposes. Lower efficiency alternators generate excess waste heat while tasking the engine to work harder to drive the less efficient alternator. Less efficient alternators run hotter, increasing the operating temperature of the bearings, windings, and diodes; therefore lowering the effective life of the alternator. Typical claw pole alternator efficiency is 50%. Typical CEN alternator efficiency is 70%. For high electric power alternators the high efficiency means significant fuel savings may be realized over less efficient alternators.
|
| C300 Series Alternators |
| Product Code |
Voltage |
Output (Amps) |
Mounting Configuration |
Regulator Options |
|
| C321 |
28 |
100 |
N/A |
N/A |
Details |
| C326 |
28 |
140 |
N/A |
N/A |
Details |
|
| C500 Series Alternators |
| The extremely rugged 500 series alternators are built to withstand the high vibration and extreme duty cycles of the harshest mining environments to keep your vehicles from experiencing debilitating downtime. |
| Product Code |
Voltage |
Output (Amps) |
Mounting Configuration |
Regulator Options |
|
| C528 |
28 |
175 |
Pad Mount |
A2-356 / A2-362 |
Details |
| C530 |
28 |
225 |
Short Pad Mount |
A2-357 / A2-362 |
Details |
| C532 |
28 |
225 |
Pad Mount |
A2-357 / A2-362 |
Details |
|
| C600 Series Alternators |
| Product Code |
Voltage |
Output (Amps) |
Mounting Configuration |
Regulator Options |
|
| C621 |
28 |
220 |
Custom Flange |
A2-141 |
Details |
| C625 |
28 |
260 |
Custom 7″ Hinge |
A2-214 |
Details |
| C626 |
28 |
260 |
Custom Flange |
A2-141 |
Details |
| C653(A) |
28 |
260 |
J180 4″ Hinge |
A2-146 |
Details |
|
| C700 Series Alternators |
| Product Code |
Voltage |
Output (Amps) |
Mounting Configuration |
Regulator Options |
|
| C736 |
28 |
370 |
Custom Flange |
A2-346 |
Details |
|
 |
|
|
| Product Code: |
C326 |
|
| Voltage: |
28 |
| Output (Amps): |
140 |
| Mounting Configuration: |
N/A |
| Regulator Options: |
N/A |
| Regulator Configuration: |
N/A |
|
|
C528 – 28 Volt 175 Amp Alternator
|
|
Product Features
- Six phase alternator design gives added benefit of low output ripple and low EMI signature.
- Rugged design withstands harsh environments and high vibration applications.
- Optional battery voltage/temperature sense regulator allows for battery charge rate optimization in all climates and operating conditions. J1939 compatible.
- Overvoltage cut-out circuit (OVCO) turns the alternator off during high voltage conditions, protecting from voltage transients that threaten sensitive vehicle electronics.
- Bidirectional rotation with optional fresh air ducting.
- Sealed bearings have high temperature grease and are heat stabilized for extended service life in hot engine compartments.
- High efficiency means lower internal operating temperature resulting in longer life. Less engine power needed to produce electric power means more engine power available for other needs.
- Designed and manufactured in the U.S.A.
 |
| Product Code: |
C528 |
| Voltage: |
28 |
| Output (Amps): |
175 |
| Mounting Configuration: |
Pad Mount |
| Regulator Options: |
A2-356 / A2-362 |
| Regulator Configuration: |
External |
| Rotation: |
Bidirectional |
|
C653(A) – 28 V 260 Amp
|
|
Product Features
- Air Cooled – Eliminates the need for an oil circulation system. No possibility of oil leaks, no hoses, and no waste heat transferred to the engine.
- High Efficiency – Means lower internal alternator operating temperature, resulting in longer alternator life. Less engine power needed to produce electric power means more engine power available for other needs
- Unique Brushless Construction – Elimination of rotating windings, brushes and slip rings yields durability, extends service life, eliminates arcing and reduces electromagnetic interference. (EMI)
- Long Life Bearings – Feature high temperature grease and are heat stabilized for extended service life in hot engine compartments
- Conformal Coating – Protects regulator and rectifier against damage from vibration and corrosion.
- High Temperature Insulation and Coating – Increases durability in hot engine compartments, seals out moisture and protects against corrosion.
- Regulator Features* : Model has R and D+ terminals to supply status to vehicle monitoring system, Soft start protection, Overvoltage protection, Smart regulators, High reliability “Military Style” connectors, 100% protected (*For select regulators)
|
|
| Product Code: |
C653(A) |
|
| Voltage: |
28 |
| Output (Amps): |
260 |
| Mounting Configuration: |
J180 4″ Hinge |
| Regulator Options: |
A2-146 |
| Regulator Configuration: |
External |
|
